I still hadn't primed the horizontal and vertical stabilizer skins yet, so I took the opportunity to do so since it was a nice day to prime. I also primed the remaining spars and the spar doubler for the VS since I wasn't able to prime them with the other HS and VS parts the last time. I left most of the vinyl on the skins up to this point so I was able to cover most of the bare metal with frog tape. I used masking paper to cover the larger areas of exposed skin not covered by vinyl.
 |
| Preparation in progress. It's pretty easy to tell which parts are untouched and which are ready to prime. |
 |
| A few days later, the parts are cured. We have one primed HS skin... |
 |
| ...and the other skins ready to go. |
